Institut für Agrartechnik

Permanent URI for this collectionhttps://hohpublica.uni-hohenheim.de/handle/123456789/19

Browse

Now showing 1 - 3 of 3

Computational sizing of solar powered peanut oil extraction in Senegal using a synthetic load profile
(2024) Bonzi, Wiomou Joévin; Romuli, Sebastian; Diouf, Djicknoum; Piriou, Bruno; Meissner, Klaus; Müller, Joachim
This paper presents an approach for sizing a hybrid photovoltaic system for a small-scale peanut oil processing company (Yaye Aissatou, Passy) in rural Senegal using a synthetic load profile. In this study, a predictive model of the electrical load of a service-based plant oil processing company was developed through a diagnosis, to evaluate the extraction process. The mass and energy balance were measured, and the process was implemented into MATLAB Simulink. The simulated load profile was implemented in HOMER Pro and the characteristics of the most profitable hybrid systems were identified. The results showed that the lowest net present cost over 25 years was found with a PV/battery/grid-system with 18.6 kWp solar panels, 16 kWh of storage, and an initial investment of 20,019 €. Compared to a grid-only scenario, this solution reduces the net present cost from an initial 72,163 € to 31,603 €, the operating cost from 3675 € per year to 590 € per year, and the cost of energy from 0.29 to 0.13 €/kWh. The renewable fraction of the proposed system is 90.0 % while the expected payback period is 6.2 years. The study demonstrates the economic feasibility of using solar energy for plant oil processing.
Effects of harvest date and ensiling additives on the optimized ensiling of Silphium perfoliatum to prevent faulty fermentation
(2024) Baumgart, Marian; Hülsemann, Benedikt; Sailer, Gregor; Oechsner, Hans; Müller, Joachim; Baumgart, Marian; State Institute of Agricultural Engineering and Bioenergy, University of Hohenheim, Garbenstraße 9, 70599 Stuttgart, Germany; (B.H.); (G.S.); (H.O.); Hülsemann, Benedikt; State Institute of Agricultural Engineering and Bioenergy, University of Hohenheim, Garbenstraße 9, 70599 Stuttgart, Germany; (B.H.); (G.S.); (H.O.); Sailer, Gregor; State Institute of Agricultural Engineering and Bioenergy, University of Hohenheim, Garbenstraße 9, 70599 Stuttgart, Germany; (B.H.); (G.S.); (H.O.); Oechsner, Hans; State Institute of Agricultural Engineering and Bioenergy, University of Hohenheim, Garbenstraße 9, 70599 Stuttgart, Germany; (B.H.); (G.S.); (H.O.); Müller, Joachim; Institute of Agricultural Engineering, Tropics and Subtropics Group, University of Hohenheim, Garbenstraße 9, 70599 Stuttgart, Germany;; Hu, Wei; Zhou, Zhiguo; Zhao, Wenqing
Silphium perfoliatum , an energy crop with a high fiber content but low concentrations of fermentable carbohydrates, presents challenges for complete fermentation in biogas production. To overcome this, a bioeconomic approach proposes the use of the fibers for paper and board production, which requires high-quality silage with minimal butyric acid, which affects the marketability of the fibers. This study aims to optimize the silaging process of Silphium perfoliatum by investigating the effects of harvest date, bacterial cultures and additives on fermentation results. Laboratory experiments were conducted to evaluate the effect of three harvest dates on fermentation acid composition, with a focus on increasing lactic acid production to inhibit butyric acid formation. Results indicate that an early harvest date (early September) is critical for achieving stable fermentation and minimizing ensiling losses. The addition of sugar-rich additives, such as syrup, was found to be essential, especially for later harvest dates. Despite these interventions, a late harvest (early November) consistently resulted in suboptimal fermentation. The results suggest that optimizing harvest timing and incorporating appropriate additives are key strategies for producing high quality silage and ensuring the suitability of Silphium perfoliatum fibers for industrial applications.
Technical evaluation of a solar-biomass flatbed dryer for maize cobs drying in Rwanda
(2023) Ntwali, Janvier; Romuli, Sebastian; Bonzi, Joévin Wiomou; Müller, Joachim
The persistent problem of postharvest losses in the maize value chain poses an arduous challenge for smallholder farmers in Rwanda, ultimately reducing their market bargaining power. As a consequence, there is an exacerbated disparity in revenues that makes farmers, predominantly female farmers, more vulnerable. The existing drying facilities are based on ambient air drying with a long drying time and the alternative mechanical dryers use mostly fossil fuels which is not a sustainable solution. A solar-biomass hybrid flatbed dryer for maize cobs drying was designed and constructed in the high-altitude volcanic zone of Rwanda. The objective was to provide farmers with an affordable and sustainable drying system with a high drying rate compared to the existing method. In this study, we present the results of the technical evaluation of the dryer to rate its capacity to dry maize cobs to the recommended moisture content. Energy balance was assessed by temperature sensors, airflow distribution was measured with a vane anemometer and the solar radiation from weather station were compared to the solar system data recorded through a datalogging charge controller. Maize was dried in three batches and the moisture content was measure with oven method. Results showed a uniform distribution of airflow on the dryer perforated flow. The burner consumed on average 6 kg of empty cobs per hour and the burner efficiency was 59.4 %. The solar system provided a maximum daily yield of 2.6 kWh, and the battery was able to maintain the system during days of low solar energy availability. Maize cobs were dried from an average moisture content of 23.0 % to 13.7 % in an average period of 90.6 hours. This drying time was significantly lower compared to the already existing system which uses more than 6 weeks. The results prove that the solar-Biomass hybrid flatbed dryer was appropriate for drying maize cobs to the recommended moisture content and thus reduce the risk of postharvest losses in maize value chain in Rwanda. The dryer might be further improved by combining the burner with a solar heating system to further reduce the biomass mass consumption.

Browse

Browsing Institut für Agrartechnik by Sustainable Development Goals "7"