Institut für Lebensmittelwissenschaft und Biotechnologie

Permanent URI for this collectionhttps://hohpublica.uni-hohenheim.de/handle/123456789/6

Browse

Now showing 1 - 20 of 74

ACHEMA 2022: Innovationen und Trends in der Trocknungstechnik
(2023) Ruprecht, Nora Alina; Frank, Jennifer; Raiber, Tobias V.; Teichmann, Heike; Gschwind, Peter; Kohlus, Reinhard
In diesem Beitrag werden die Highlights der auf der ACHEMA 2022 ausgestellten Neuerungen zusammengefasst und es wird über die beobachteten Trends berichtet. Neben neuen Anlagen in einzelnen Trocknungsbereichen wurden die Schritte der Firmen in den Bereichen der Schwerpunktthemen Digitalisierung und Nachhaltigkeit näher betrachtet.
Almond-like aroma formation of acid whey by Ischnoderma benzoinum fermentation: potential application in novel beverage development
(2025) Hannemann, Lea; Klauss, Raphaela; Gleissle, Anne; Heinrich, Patrick; Braunbeck, Thomas; Zhang, Yanyan
To address the sourish off-aroma of acid whey and enhance its upcycling, a new basidiomycete Ischnoderma benzoinum -mediated fermentation system was developed using pure acid whey as the sole substrate. A pleasant sweetish and marzipan-like odor was perceived after fermentation within 7 d at 24 °C in darkness, which was shaped from key contributors including 4-methoxybenzaldehyde (odor activity value (OAV) 878), 3-methylbutanal (OAV 511), 3,4-dimethoxybenzaldehyde (OAV 50), and benzaldehyde (OAV 28). The typical sweetish and almond-like odor persisted well after ultrahigh-temperature processing, though its intensity decreased slightly. Concurrently, the fermentation reduced lactose from 52 to 20 g/L but increased the contents of essential amino acids like threonine, leucine, and lysine. No significant cytotoxicity or genotoxicity differences were found between fermented and unfermented whey. Overall, the study highlights the capability of I. benzoinum fermentation to enhance the flavor of acid whey, offering a promising approach for creating nutritional and flavorful acid-whey-based products.
Application of AprX from Pseudomonas paralactis for the improvement of the emulsifying properties of milk, plant and insect protein and estimation of their hydrolysate’s bitter potential
(2025) Volk, Veronika; Ewert, Jacob; Longhi, Miriam; Stressler, Timo; Fischer, Lutz
Protein properties can be modified by selective enzymatic hydrolysis. In this study, the alkaline metalloendopeptidase AprX (Serralysin; EC 3.4.24.40) from Pseudomonas paralactis was used for the tailored hydrolysis of different food proteins resulting in the production of protein hydrolysates with improved emulsifying properties. Sodium caseinate, wheat gluten and buffalo worm protein were used for AprX hydrolysis at 40 °C and pH 8 to cover a spectrum of different protein sources. A maximum degree of hydrolysis (DH) of 13.1 ± 0.2%, 14.2 ± 0.1% and 20.7 ± 0.1% was reached for sodium caseinate, wheat gluten and the worm protein, respectively. The corresponding hydrolysate properties were analyzed regarding their particle size, peptide composition, solubility, viscosity, surface hydrophobicity and interfacial tension. The emulsifying properties were investigated by the oil-droplet size, ζ-potential and stability of emulsions prepared from the hydrolysates. Using partially hydrolyzed sodium caseinate (DH = 10.6%) as an emulsifier lead to an eightfold increase of the emulsion stability (t1/2 = 180 ± 0 min) compared to unhydrolyzed sodium caseinate. The emulsion stability using wheat gluten hydrolysates (DH = 11.9%) was increased 30-fold (t1/2 = 45 ± 5 min). Simultaneously, the solubility of gluten was increased by 60%. Buffalo worm hydrolysates (DH = 14.6%) had a twofold (t1/2 = 85 ± 5 min) increased emulsion stability. In conclusion, AprX can be used to improve the solubility and emulsifying properties of food proteins at a relatively high DH.
Assessing the capabilities of 2D fluorescence monitoring in microtiter plates with data-driven modeling for secondary substrate limitation experiments of Hansenula polymorpha
(2023) Berg, Christoph; Herbst, Laura; Gremm, Lisa; Ihling, Nina; Paquet-Durand, Olivier; Hitzmann, Bernd; Büchs, Jochen
Background: Non-invasive online fluorescence monitoring in high-throughput microbioreactors is a well-established method to accelerate early-stage bioprocess development. Recently, single-wavelength fluorescence monitoring in microtiter plates was extended to measurements of highly resolved 2D fluorescence spectra, by introducing charge-coupled device (CCD) detectors. Although introductory experiments demonstrated a high potential of the new monitoring technology, an assessment of the capabilities and limits for practical applications is yet to be provided. Results: In this study, three experimental sets introducing secondary substrate limitations of magnesium, potassium, and phosphate to cultivations of a GFP-expressing H. polymorpha strain were conducted. This increased the complexity of the spectral dynamics, which were determined by 2D fluorescence measurements. The metabolic responses upon growth limiting conditions were assessed by monitoring of the oxygen transfer rate and extensive offline sampling. Using only the spectral data, subsequently, partial least-square (PLS) regression models for the key parameters of glycerol, cell dry weight, and pH value were generated. For model calibration, spectral data of only two cultivation conditions were combined with sparse offline sampling data. Applying the models to spectral data of six cultures not used for calibration, resulted in an average relative root-mean-square error (RMSE) of prediction between 6.8 and 6.0%. Thus, while demanding only sparse offline data, the models allowed the estimation of biomass accumulation and glycerol consumption, even in the presence of more or less pronounced secondary substrate limitation. Conclusion: For the secondary substrate limitation experiments of this study, the generation of data-driven models allowed a considerable reduction in sampling efforts while also providing process information for unsampled cultures. Therefore, the practical experiments of this study strongly affirm the previously claimed advantages of 2D fluorescence spectroscopy in microtiter plates.
Biotechnologische Herstellung des Biotensids Surfactin
(2021) Lilge, Lars
Brewing a sustainable future: a firm-level analysis of sustainability initiatives in the coffee sector
(2025) Boller, Meta Leonie; Bosch, Christine; Heinzel, Kathleen; Birkenberg, Athena; Krupitzer, Christian
The coffee industry has long relied on third-party certification as their approach to sustainability, driven by customer demand and changing consumer behavior. Today, multiple forms of sustainability engagement have developed in the industry. This study uses a machine learning approach to analyze the engagement in sustainability initiatives of 100 firms active in the German market. Results reveal that company size and value chain position influence choice and engagement intensity in sustainability initiatives. A complementary literature analysis on policy recommendations to promote sustainability engagement in the coffee industry revealed a fragmented and insufficiently granular picture to address the diverse needs of stakeholders. While company characteristics significantly influence their choice of sustainability initiatives, policymakers often adopt generic approaches that do not reflect these nuances. Future research could extend this approach to deepen understanding or validate findings of policies for sustainable transformation in the coffee sector to other critical crops.
Chemical compositions and oxidative stabilities of cold‐pressed walnut oils (Juglans regia L.): effects of chemical refining, water degumming, and molecular distillation
(2024) Liu, Longfei; Cai, Hongling; Zhang, Youfeng; Jin, Qingzhe; Wang, Xingguo; Jin, Jun
Walnut oils are of important academic and economic value, and are becoming one of the most important woody oils. Accurate and moderate refining techniques are required to produce high‐quality walnut oils. In this work, walnut oils obtained from cold processing were refined in three typical techniques, mainly chemical refining, water degumming, and molecular distillation. Physicochemical properties (acid value and peroxide value [POV]), minor components (tocopherol, polyphenols, and phytosterol), oxidative stability indices, and volatile compounds were analyzed to find out the appropriate refining method for the cold‐pressed walnut oils. Quality indices of all the refined oils from the three different refining methods met the requirements of the national standard, of which the POV of chemically refined oil (0.241 g/100 g) was higher than crude oil (0.058 g/100 g). Water degumming was most suitable for retaining of bioactive compounds, for example, the tocopherol was 259.40 mg/kg, the polyphenols was 44.54 mg GAE/kg, and the phytosterol was 987.32 mg/kg, but oxidation stability of the obtained oil (3.09 h) was lower than that of molecular distilled oil (4.18 h). Initial physicochemical properties especially the POV had a significant impact on oxidation stability. There is a trade‐off between the retention of nutrients and extending shelf life, indicating appropriate refining techniques should be developed; that is, water degumming is suggested to be involved in producing high‐quality cold‐pressed walnut oils.
Comparative assessment of ethanol production from six typical German waste baked products
(2024) Almuhammad, Mervat; Kölling, Ralf; Einfalt, Daniel
This study investigates the potential for bioethanol production of six types of typical German leftover baked products: bread rolls, pretzel rolls, fine rye bread, white bread, pastry, and cream cakes. The experimental setup consisted of two experiments—one as a control and another with the addition of diammonium phosphate (DAP) to the mash. In terms of monosaccharide concentration at 30% dry matter (DM), white bread mash exhibited the highest level at 251.5 g/L, while cream cakes mash had the lowest at 186 g/L. The highest ethanol production occurred after 96 h of fermentation with rye bread, yielding 78.4 g/L. In contrast, despite having the highest monosaccharide levels, white bread produced only 21.5 g/L of ethanol after 96 h. The addition of DAP accelerated monosaccharide consumption in all baked products, with cream cakes completing the process in just 24 h. Bread rolls, pretzel rolls, pastry, and white bread fermentations finished within 72 h. Ethanol yields significantly increased in three DAP samples, with pretzel rolls yielding the highest ethanol concentration at 98.5 g/L, followed by white bread with 90.6 g/L, and bread rolls with 87.7 g/L. DAP had a substantial impact on all samples, reducing fermentation time and/or increasing ethanol yield. This effect was particularly pronounced with white bread, where it improved conversion efficiency from 17 to 72%, resulting in 90.6 g/L of ethanol. These results demonstrate that waste baked products hold substantial potential for bioethanol production, and this potential can be further enhanced through the addition of DAP.
Comparison of binding properties of a laccase-treated pea protein-sugar beet pectin mixture with methylcellulose in a bacon-type meat analogue
(2022) Moll, Pascal; Salminen, Hanna; Stadtmueller, Lucie; Schmitt, Christophe; Weiss, Jochen
A bacon-type meat analogue consists of different structural layers, such as textured protein and a fat mimetic. To obtain a coherent and appealing product, a suitable binder must glue those elements together. A mixture based on pea protein and sugar beet pectin (r = 2:1, 25% w/w solids, pH 6) with and without laccase addition and a methylcellulose hydrogel (6% w/w) serving as benchmark were applied as binder between textured protein and a fat mimetic. A tensile strength test, during which the layers were torn apart, was performed to measure the binding ability. The pea protein–sugar beet pectin mixture without laccase was viscoelastic and had medium and low binding strength at 25 °C (F ≤ 3.5 N) and 70 °C (F ≈ 1.0 N), respectively. The addition of laccase solidified the mixture and increased binding strength at 25 °C (F ≥ 4.0 N) and 70 °C (F ≈ 2.0 N), due to covalent bonds within the binder and between the binder and the textured protein or the fat mimetic layers. Generally, the binding strength was higher when two textured protein layers were glued together. The binding properties of methylcellulose hydrogel was low (F ≤ 2.0 N), except when two fat mimetic layers were bound due to hydrophobic interactions becoming dominant. The investigated mixed pectin–pea protein system is able serve as a clean-label binder in bacon-type meat analogues, and the application in other products seems promising.
Construction and description of a constitutive plipastatin mono-producing Bacillus subtilis
(2020) Vahidinasab, Maliheh; Lilge, Lars; Reinfurt, Aline; Pfannstiel, Jens; Henkel, Marius; Morabbi Heravi, Kambiz; Hausmann, Rudolf
Background: Plipastatin is a potent Bacillus antimicrobial lipopeptide with the prospect to replace conventional antifungal chemicals for controlling plant pathogens. However, the application of this lipopeptide has so far been investigated in a few cases, principally because of the yield in low concentration and unknown regulation of biosynthesis pathways. B. subtilis synthesizes plipastatin by a non-ribosomal peptide synthetase encoded by the ppsABCDE operon. In this study, B. subtilis 3NA (a non-sporulation strain) was engineered to gain more insights about plipastatin mono-production. Results: The 4-phosphopantetheinyl transferase Sfp posttranslationally converts non-ribosomal peptide synthetases from inactive apoforms into their active holoforms. In case of 3NA strain, sfp gene is inactive. Accordingly, the first step was an integration of a repaired sfp version in 3NA to construct strain BMV9. Subsequently, plipastatin production was doubled after integration of a fully expressed degQ version from B. subtilis DSM10T strain (strain BMV10), ensuring stimulation of DegU-P regulatory pathway that positively controls the ppsABSDE operon. Moreover, markerless substitution of the comparably weak native plipastatin promoter (Ppps) against the strong constitutive promoter Pveg led to approximately fivefold enhancement of plipastatin production in BMV11 compared to BMV9. Intriguingly, combination of both repaired degQ expression and promoter exchange (Ppps::Pveg) did not increase the plipastatin yield. Afterwards, deletion of surfactin (srfAA-AD) operon by the retaining the regulatory comS which is located within srfAB and is involved in natural competence development, resulted in the loss of plipastatin production in BMV9 and significantly decreased the plipastatin production of BMV11. We also observed that supplementation of ornithine as a precursor for plipastatin formation caused higher production of plipastatin in mono-producer strains, albeit with a modified pattern of plipastatin composition. Conclusions: This study provides evidence that degQ stimulates the native plipastatin production. Moreover, a full plipastatin production requires surfactin synthetase or some of its components. Furthermore, as another conclusion of this study, results point towards ornithine provision being an indispensable constituent for a plipastatin mono-producer B. subtilis strain. Therefore, targeting the ornithine metabolic flux might be a promising strategy to further investigate and enhance plipastatin production by B. subtilis plipastatin mono-producer strains.
Consumption of antioxidant-rich “Cerrado” cashew pseudofruit affects hepatic gene expression in obese C57BL/6J high fat-fed mice
(2022) Egea, Mariana Buranelo; Pierce, Gavin; Park, Si-Hong; Lee, Sang-In; Heger, Fabienne; Shay, Neil
The pseudofruit of A. othonianum Rizzini, “Cerrado” cashew pulp, has been described as rich in flavonoids, phenolic compounds, and vitamin C. The objective of this work was to evaluate the beneficial health effects seen with the addition of “Cerrado” cashew pulp (CP) to an obesogenic high fat diet provided to C57BL/6J male mice. In week 9, the HF-fed group had a significantly higher baseline glucose concentration than the LF- or HF+CP-fed groups. In RNAseq analysis, 4669 of 5520 genes were found to be differentially expressed. Among the genes most upregulated with the ingestion of the CP compared to HF were Ph1da1, SLc6a9, Clec4f, and Ica1 which are related to glucose homeostasis; Mt2 that may be involved steroid biosynthetic process; and Ciart which has a role in the regulation of circadian rhythm. Although “Cerrado” CP intake did not cause changes in the food intake or body weight of fed mice with HF diet, carbohydrate metabolism appeared to be improved based on the observed changes in gene expression.
Consumption of yeast-fermented wheat and rye breads increases colitis and mortality in a mouse model of colitis
(2022) Zimmermann, Julia; De Fazio, Luigia; Kaden-Volynets, Valentina; Hitzmann, Bernd; Bischoff, Stephan C.
Background: Cereals are known to trigger for wheat allergy, celiac disease and non-celiac wheat sensitivity (NCWS). Inflammatory processes and intestinal barrier impairment are suspected to be involved in NCWS, although the molecular triggers are unclear. Aims: We were interested if different bread types influence inflammatory processes and intestinal barrier function in a mouse model of inflammatory bowel disease. Methods: Epithelial caspase-8 gene knockout (Casp8 ΔIEC ) and control (Casp8 fl ) mice were randomized to eight groups, respectively. The groups received different diets for 28 days (gluten-free diet, gluten-rich diet 5 g%, or different types of bread at 50 g%). Breads varied regarding grain, milling and fermentation. All diets were isocaloric. Results: Regardless of the diet, Casp8 ΔIEC mice showed pronounced inflammation in colon compared to ileum, whereas Casp8 fl mice were hardly inflamed. Casp8 fl mice could tolerate all bread types. Especially yeast fermented rye and wheat bread from superfine flour but not pure gluten challenge increased colitis and mortality in Casp8 ΔIEC mice. Hepatic expression of lipopolysaccharide-binding protein and colonic expression of tumor necrosis factor-α genes were inversely related to survival. The bread diets, but not the gluten-rich diet, also decreased colonic tight junction expression to variable degrees, without clear association to survival and inflammation. Conclusions: Bread components, especially those from yeast-fermented breads from wheat and rye, increase colitis and mortality in Casp8 ΔIEC mice highly susceptible to intestinal inflammation, whereas control mice can tolerate all types of bread without inflammation. Yet unidentified bread components other than gluten seem to play the major role.
Dairy byproducts as sustainable alternatives to FCS in 2D and 3D skeletal muscle cell cultures
(2025) Baldeweg, Tobias Horst; Hubel, Philipp; Günther, Johannes; Ostertag, Fabian; Nellinger, Svenja; Heine, Simon; Kluger, Petra Juliane
Skeletal muscle tissue engineering is a rapidly developing field with applications in disease modelling, tissue replacement, biorobotics, and cultivated meat. The need for more sustainable and ethical biotechnologies has grown due to concerns about resource scarcity, climate change, and animal welfare. One major challenge is replacing fetal calf serum (FCS), a widely used but ethically and environmentally highly problematic media supplement. A promising alternative is the utilization of natural byproducts such as whey and colostrum from the dairy industry, which provide essential nutrients and growth factors. In this study, wheys produced by microfiltration of raw milk and colostrum were investigated as FCS replacements for culturing C2C12 skeletal muscle cells. Composition analysis confirmed a variety of pro-proliferative compounds in both substances. Cell culture experiments led to the development of an optimized medium formulation based on colostrum whey. Colostrum whey medium (CM) supported cell proliferation and maintained the myogenic differentiation potential for over 30 days. Additionally, a CM-based freezing solution enabled effective cryopreservation throughout culture. In 3D static suspension culture, CM sustained viable spheroids for over 14 days. Spheroids showed significantly higher proliferation compared to those in serum-containing medium, making CM suitable for 3D modelling and scale-up of biomass production. These findings highlight CM as a sustainable, cost-effective, and ethical alternative for skeletal muscle tissue engineering, particularly in cultivated meat production.
Determination of mono- and diacylglycerols from E 471 food emulsifiers in aerosol whipping cream by high-performance thin-layer chromatography–fluorescence detection
(2020) Oellig, Claudia; Blankart, Max; Hinrichs, Jörg; Schwack, Wolfgang; Granvogl, Michael
Mono- and diacylglycerol (MAG and DAG) emulsifiers (E 471) are widely applied to regulate techno-functional properties in different food categories, for example, in dairy products. A method for the determination of MAG and DAG in aerosol whipping cream by high-performance thin-layer chromatography with fluorescence detection (HPTLC–FLD) after derivatization with primuline was developed. For sample preparation, aerosol whipping cream was mixed with ethanol, followed by the addition of water and liquid-liquid extraction with tert-butyl methyl ether. The sample extracts were analyzed by HPTLC–FLD on silica gel LiChrospher plates with n-pentane/n-hexane/diethyl ether (22.5:22.5:55, v/v/v) as mobile phase, when interfering matrix like cholesterol and triacylglycerols were successfully separated from the E 471 food additives. For quantitation, an emulsifier with known composition was used as calibration standard and the fluorescent MAG and DAG were scanned at 366/> 400 nm. Limits of detection and quantitation of 4 and 11 mg/100 g aerosol whipping cream were obtained for both monostearin and 1,2-distearin, respectively, and allowed the reliable quantitation of MAG and DAG from E 471 far below commonly applied emulsifier amounts. Recoveries from model aerosol whipping cream with 400 mg E 471/100 g were determined in a calibration range of 200–600 mg E 471/100 g sample and ranged between 86 and 105% with relative standard deviations below 7%. In aerosol whipping creams from the German market, E 471 amounts ranged between 384 and 610 mg/100 g.
Editorial: Microbial biosurfactants: updates on their biosynthesis, production and applications
(2024) Hausmann, Rudolf; Déziel, Eric; Soberón-Chávez, Gloria
Effect of cutting set variations on structural and functional properties of hamburgers
(2024) Berger, Lisa M.; Adam, Felix; Gibis, Monika; Witte, Franziska; Terjung, Nino; Weiss, Jochen
Meat grinders are composed of a combination of individual functional elements (e.g., screw conveyor, perforated plates, knives). This setup, and in particular the chosen cutting set, influences the characteristics of ground meat and hamburgers produced. In this study, we took a closer look at the effect of cutting set variations and process parameters on structural, functional, and physicochemical properties of beef hamburgers produced. It was found that the specific mechanical energy input during grinding increased when cutting levels, i.e., a set of one hole plate and one knife, were increased, causing more cell disintegration ( r = 0.387, p = 0.02). Surprisingly though, an influence on the functional and quality parameters of the hamburgers could not be found for most parameters tested. The findings indicate that variations in the cutting set affect the process parameters and the stress applied to the meat, but residence times in this zone are too small to cause noticeable effects on the analytical and qualitative properties of hamburgers. As such, there are options for energy and cost optimization of industrial grinding processes without sacrificing quality.
Effect of different oxygen atmospheres on color stability of modified atmosphere packaged beef using non-invasive measurement
(2025) Krell, Johannes; Müller, Theresa; Poveda-Arteaga, Alejandro; Weiss, Jochen; Terjung, Nino; Gibis, Monika; Ziarno, Małgorzata
The influence of a 1% oxygen atmosphere on the color stability of modified atmosphere packaged beef was investigated. Beef silverside slices were packed under 1%, 20%, and 70% oxygen atmospheres and stored at 2 °C for 14 days. Color and reflection data were measured non-invasively. The L*a*b* values were analyzed, the color difference ΔE2000, and the levels of myoglobin (Mb), deoxy-(DMb), oxy-(OMb), and metmyoglobin (MMb) were calculated. The 1% oxygen atmosphere resulted in a rapid MMb formation from 0.63 (day 0) to 1.27 (day 8) (p < 0.05). The other samples showed slight increases from 0.65 to 0.80 MMb (20%) and 0.65 to 0.79 MMb (70%). On day 10, the 20% oxygen sample showed an increased MMb formation (1.33 MMb). The 70% atmosphere resulted in a final value of 0.91 MMb after 14 days. These results show that an oxygen content of 1% accelerates the formation of MMb at an early stage. A higher oxygen content in the packaging delays MMb development through OMb formation, which masks MMb creation, to a certain extent. Measuring the packaged meat pieces over a 14-day storage period provides detailed insights into the development of Mb formation and critical points during storage.
Effect of liquefaction temperature and enzymatic treatment on bioethanol production from mixed waste baked products
(2025) Almuhammad, Mervat; Kölling, Ralf; Einfalt, Daniel
This study investigates the effect of different liquefaction temperatures (50–70 °C) and four commercial enzyme formulations on glucose release and subsequent ethanol yield, using mixed waste baked products as a substrate. Among the enzymes tested, Amylase GA 500 proved to be superior in the hydrolysis of starch at lower temperatures (50 °C and 55°C). At higher liquefaction temperatures (65 °C and 70°C) all four enzyme preparations showed comparable activity. The highest glucose concentration (205.7 g/L) and the highest ethanol yield (92 g/L) were achieved with Amylase GA 500 at 65 °C. Its superior performance is attributed to the synergistic activity of α-amylase and glucoamylase, which facilitates efficient starch hydrolysis. Crucially, we discovered that the liquefaction temperature profoundly affects fermentation speed independently of the initial glucose concentration or the enzyme preparation used for starch hydrolysis. This novel mechanistic insight suggests that higher temperature treatment either makes an additional factor crucial for yeast fermentation available or depletes/destroys an inhibitor present in the complex waste bakery product matrix. These findings highlight the critical role of temperature and enzyme formulation in optimizing bioethanol production from bakery waste, supporting the development of more sustainable and efficient waste-to-biofuel processes.
Effect of partial condensation (dephlegmation) in fruit brandy distillation equipment on the composition of apple brandies
(2025) Yagishita, Manami; Reber, Oliver; Alter, Daniela; Kölling, Ralf; Einfalt, Daniel; Chinnici, Fabio
Fruit brandy equipment commonly uses partial condensation (dephlegmation) to generate reflux in the distillation column. Here, we examined the effect of dephlegmation on the composition of fruit brandies in both lab-scale and large-scale settings. In lab-scale experiments, the dephlegmator led to a pronounced enrichment of ethanol in the distillate due to preferred condensation of water, while the concentration of flavor compounds was differentially affected. Some compounds were enriched in the distillate, some were depleted, and some were unaffected by dephlegmation compared with the control without a dephlegmator. Large-scale fruit brandy equipment relying exclusively on dephlegmation was compared as standard with an enrichment section containing three trays. In the equipment relying on dephlegmation, tail components such as fusel alcohols were less well separated from the middle run, which led to a reduced yield of clean spirit in the middle run. In triangle tests, the spirits from the two devices could be clearly differentiated, but there was no clear preference for one spirit or the other. This study provides for the first time detailed data on the influence of dephlegmators on the behavior of flavor compounds during fruit brandy distillation.
Effect of pulsed light treatment on natural microbiota, enzyme activity, and phytochemical composition of pineapple (Ananas comosus [L.] Merr.) juice
(2020) Vollmer, Kathrin; Chakraborty, Snehasis; Bhalerao, Prasanna Prakash; Carle, Reinhold; Frank, Jan; Steingass, Christof Björn
The effect of pulsed light (PL) on numerous important quality characteristics of pineapple juice was studied and compared with untreated and thermally pasteurised samples. The laboratory scale PL batch system used was operated with each three different voltages (1.8, 2.1, and 2.4 kV) and numbers of pulses (47, 94, and 187). Treatments with 2.4 kV and either 94 or 187 pulses (757/1479 J·cm−2) resulted in a 5-log reduction in aerobic mesophiles and the yeast and mould counts. Peroxidase was more resistant to PL than polyphenol oxidase, whereas the bromelain activity was completely retained in all PL-treated juices. Colour and antioxidant capacity were minimally affected, while vitamin C, genuine pineapple furanones, and phenolic compounds declined. In contrast, thermal pasteurisation was more detrimental to colour, antioxidant capacity, and vitamin C content, but resulted in a superior inactivation of microorganisms and enzymes and retention of phenolic compounds. Principal component analysis (PCA) permitted the differentiation of fresh, thermally pasteurised, and all PL-treated juices. PCA on the basis of the individual juice constituents additionally arranged the latter juices according to the number of pulses and voltage levels applied, particularly promoted by the oxidation of ascorbic to dehydroascorbic acid. In conclusion, PL treatment represents a promising new alternative to conventional thermal preservation techniques, whereby the inactivation of deteriorative enzymes may be further optimised.

Browse

Browsing Institut für Lebensmittelwissenschaft und Biotechnologie by Sustainable Development Goals "12"