Institut für Lebensmittelwissenschaft und Biotechnologie

Permanent URI for this collectionhttps://hohpublica.uni-hohenheim.de/handle/123456789/6

Browse

Now showing 1 - 20 of 20

Application of AprX from Pseudomonas paralactis for the improvement of the emulsifying properties of milk, plant and insect protein and estimation of their hydrolysate’s bitter potential
(2025) Volk, Veronika; Ewert, Jacob; Longhi, Miriam; Stressler, Timo; Fischer, Lutz
Protein properties can be modified by selective enzymatic hydrolysis. In this study, the alkaline metalloendopeptidase AprX (Serralysin; EC 3.4.24.40) from Pseudomonas paralactis was used for the tailored hydrolysis of different food proteins resulting in the production of protein hydrolysates with improved emulsifying properties. Sodium caseinate, wheat gluten and buffalo worm protein were used for AprX hydrolysis at 40 °C and pH 8 to cover a spectrum of different protein sources. A maximum degree of hydrolysis (DH) of 13.1 ± 0.2%, 14.2 ± 0.1% and 20.7 ± 0.1% was reached for sodium caseinate, wheat gluten and the worm protein, respectively. The corresponding hydrolysate properties were analyzed regarding their particle size, peptide composition, solubility, viscosity, surface hydrophobicity and interfacial tension. The emulsifying properties were investigated by the oil-droplet size, ζ-potential and stability of emulsions prepared from the hydrolysates. Using partially hydrolyzed sodium caseinate (DH = 10.6%) as an emulsifier lead to an eightfold increase of the emulsion stability (t1/2 = 180 ± 0 min) compared to unhydrolyzed sodium caseinate. The emulsion stability using wheat gluten hydrolysates (DH = 11.9%) was increased 30-fold (t1/2 = 45 ± 5 min). Simultaneously, the solubility of gluten was increased by 60%. Buffalo worm hydrolysates (DH = 14.6%) had a twofold (t1/2 = 85 ± 5 min) increased emulsion stability. In conclusion, AprX can be used to improve the solubility and emulsifying properties of food proteins at a relatively high DH.
Assessing the capabilities of 2D fluorescence monitoring in microtiter plates with data-driven modeling for secondary substrate limitation experiments of Hansenula polymorpha
(2023) Berg, Christoph; Herbst, Laura; Gremm, Lisa; Ihling, Nina; Paquet-Durand, Olivier; Hitzmann, Bernd; Büchs, Jochen
Background: Non-invasive online fluorescence monitoring in high-throughput microbioreactors is a well-established method to accelerate early-stage bioprocess development. Recently, single-wavelength fluorescence monitoring in microtiter plates was extended to measurements of highly resolved 2D fluorescence spectra, by introducing charge-coupled device (CCD) detectors. Although introductory experiments demonstrated a high potential of the new monitoring technology, an assessment of the capabilities and limits for practical applications is yet to be provided. Results: In this study, three experimental sets introducing secondary substrate limitations of magnesium, potassium, and phosphate to cultivations of a GFP-expressing H. polymorpha strain were conducted. This increased the complexity of the spectral dynamics, which were determined by 2D fluorescence measurements. The metabolic responses upon growth limiting conditions were assessed by monitoring of the oxygen transfer rate and extensive offline sampling. Using only the spectral data, subsequently, partial least-square (PLS) regression models for the key parameters of glycerol, cell dry weight, and pH value were generated. For model calibration, spectral data of only two cultivation conditions were combined with sparse offline sampling data. Applying the models to spectral data of six cultures not used for calibration, resulted in an average relative root-mean-square error (RMSE) of prediction between 6.8 and 6.0%. Thus, while demanding only sparse offline data, the models allowed the estimation of biomass accumulation and glycerol consumption, even in the presence of more or less pronounced secondary substrate limitation. Conclusion: For the secondary substrate limitation experiments of this study, the generation of data-driven models allowed a considerable reduction in sampling efforts while also providing process information for unsampled cultures. Therefore, the practical experiments of this study strongly affirm the previously claimed advantages of 2D fluorescence spectroscopy in microtiter plates.
Comparison of binding properties of a laccase-treated pea protein-sugar beet pectin mixture with methylcellulose in a bacon-type meat analogue
(2022) Moll, Pascal; Salminen, Hanna; Stadtmueller, Lucie; Schmitt, Christophe; Weiss, Jochen
A bacon-type meat analogue consists of different structural layers, such as textured protein and a fat mimetic. To obtain a coherent and appealing product, a suitable binder must glue those elements together. A mixture based on pea protein and sugar beet pectin (r = 2:1, 25% w/w solids, pH 6) with and without laccase addition and a methylcellulose hydrogel (6% w/w) serving as benchmark were applied as binder between textured protein and a fat mimetic. A tensile strength test, during which the layers were torn apart, was performed to measure the binding ability. The pea protein–sugar beet pectin mixture without laccase was viscoelastic and had medium and low binding strength at 25 °C (F ≤ 3.5 N) and 70 °C (F ≈ 1.0 N), respectively. The addition of laccase solidified the mixture and increased binding strength at 25 °C (F ≥ 4.0 N) and 70 °C (F ≈ 2.0 N), due to covalent bonds within the binder and between the binder and the textured protein or the fat mimetic layers. Generally, the binding strength was higher when two textured protein layers were glued together. The binding properties of methylcellulose hydrogel was low (F ≤ 2.0 N), except when two fat mimetic layers were bound due to hydrophobic interactions becoming dominant. The investigated mixed pectin–pea protein system is able serve as a clean-label binder in bacon-type meat analogues, and the application in other products seems promising.
Consumption of antioxidant-rich “Cerrado” cashew pseudofruit affects hepatic gene expression in obese C57BL/6J high fat-fed mice
(2022) Egea, Mariana Buranelo; Pierce, Gavin; Park, Si-Hong; Lee, Sang-In; Heger, Fabienne; Shay, Neil
The pseudofruit of A. othonianum Rizzini, “Cerrado” cashew pulp, has been described as rich in flavonoids, phenolic compounds, and vitamin C. The objective of this work was to evaluate the beneficial health effects seen with the addition of “Cerrado” cashew pulp (CP) to an obesogenic high fat diet provided to C57BL/6J male mice. In week 9, the HF-fed group had a significantly higher baseline glucose concentration than the LF- or HF+CP-fed groups. In RNAseq analysis, 4669 of 5520 genes were found to be differentially expressed. Among the genes most upregulated with the ingestion of the CP compared to HF were Ph1da1, SLc6a9, Clec4f, and Ica1 which are related to glucose homeostasis; Mt2 that may be involved steroid biosynthetic process; and Ciart which has a role in the regulation of circadian rhythm. Although “Cerrado” CP intake did not cause changes in the food intake or body weight of fed mice with HF diet, carbohydrate metabolism appeared to be improved based on the observed changes in gene expression.
Consumption of yeast-fermented wheat and rye breads increases colitis and mortality in a mouse model of colitis
(2022) Zimmermann, Julia; De Fazio, Luigia; Kaden-Volynets, Valentina; Hitzmann, Bernd; Bischoff, Stephan C.
Background: Cereals are known to trigger for wheat allergy, celiac disease and non-celiac wheat sensitivity (NCWS). Inflammatory processes and intestinal barrier impairment are suspected to be involved in NCWS, although the molecular triggers are unclear. Aims: We were interested if different bread types influence inflammatory processes and intestinal barrier function in a mouse model of inflammatory bowel disease. Methods: Epithelial caspase-8 gene knockout (Casp8 ΔIEC ) and control (Casp8 fl ) mice were randomized to eight groups, respectively. The groups received different diets for 28 days (gluten-free diet, gluten-rich diet 5 g%, or different types of bread at 50 g%). Breads varied regarding grain, milling and fermentation. All diets were isocaloric. Results: Regardless of the diet, Casp8 ΔIEC mice showed pronounced inflammation in colon compared to ileum, whereas Casp8 fl mice were hardly inflamed. Casp8 fl mice could tolerate all bread types. Especially yeast fermented rye and wheat bread from superfine flour but not pure gluten challenge increased colitis and mortality in Casp8 ΔIEC mice. Hepatic expression of lipopolysaccharide-binding protein and colonic expression of tumor necrosis factor-α genes were inversely related to survival. The bread diets, but not the gluten-rich diet, also decreased colonic tight junction expression to variable degrees, without clear association to survival and inflammation. Conclusions: Bread components, especially those from yeast-fermented breads from wheat and rye, increase colitis and mortality in Casp8 ΔIEC mice highly susceptible to intestinal inflammation, whereas control mice can tolerate all types of bread without inflammation. Yet unidentified bread components other than gluten seem to play the major role.
CortexVR: Immersive analysis and training of cognitive executive functions of soccer players using virtual reality and machine learning
(2022) Krupitzer, Christian; Naber, Jens; Stauffert, Jan-Philipp; Mayer, Jan; Spielmann, Jan; Ehmann, Paul; Boci, Noel; Bürkle, Maurice; Ho, André; Komorek, Clemens; Heinickel, Felix; Kounev, Samuel; Becker, Christian; Latoschik, Marc Erich
Goal: This paper presents an immersive Virtual Reality (VR) system to analyze and train Executive Functions (EFs) of soccer players. EFs are important cognitive functions for athletes. They are a relevant quality that distinguishes amateurs from professionals. Method: The system is based on immersive technology, hence, the user interacts naturally and experiences a training session in a virtual world. The proposed system has a modular design supporting the extension of various so-called game modes. Game modes combine selected game mechanics with specific simulation content to target particular training aspects. The system architecture decouples selection/parameterization and analysis of training sessions via a coaching app from an Unity3D-based VR simulation core. Monitoring of user performance and progress is recorded by a database that sends the necessary feedback to the coaching app for analysis. Results: The system is tested for VR-critical performance criteria to reveal the usefulness of a new interaction paradigm in the cognitive training and analysis of EFs. Subjective ratings for overall usability show that the design as VR application enhances the user experience compared to a traditional desktop app; whereas the new, unfamiliar interaction paradigm does not negatively impact the effort for using the application. Conclusion: The system can provide immersive training of EF in a fully virtual environment, eliminating potential distraction. It further provides an easy-to-use analyzes tool to compare user but also an automatic, adaptive training mode.
A diamine oxidase from Glutamicibacter halophytocola for the degradation of histamine and tyramine in foods
(2025) Kettner, Lucas; Freund, Alexander; Bechtel, Anna; Costa-Catala, Judit; Fischer, Lutz; Kettner, Lucas; Department of Biotechnology and Enzyme Science, Institute of Food Science and Biotechnology, University of Hohenheim, Garbenstr. 25, 70599 Stuttgart, Germany; Freund, Alexander; Department of Biotechnology and Enzyme Science, Institute of Food Science and Biotechnology, University of Hohenheim, Garbenstr. 25, 70599 Stuttgart, Germany; Bechtel, Anna; Department of Biotechnology and Enzyme Science, Institute of Food Science and Biotechnology, University of Hohenheim, Garbenstr. 25, 70599 Stuttgart, Germany; Costa-Catala, Judit; Departament de Nutrició, Ciències de l’Alimentació i Gastronomia, Campus de l’Alimentació de Torribera, Universitat de Barcelona, Av. Prat de la Riba 171, 08921 Santa Coloma de Gramenet, Spain; Fischer, Lutz; Department of Biotechnology and Enzyme Science, Institute of Food Science and Biotechnology, University of Hohenheim, Garbenstr. 25, 70599 Stuttgart, Germany
A novel diamine oxidase (DAO) was discovered in the bacterium Glutamicibacter halophytocola (DAO-GH). The gene of DAO-GH was integrated into the genome of the yeast Komagataella phaffii and recombinantly produced under control of the methanol-inducible AOX1 promoter in a bioreactor cultivation. A high DAO activity of 70.2 ± 5.2 µkat/Lculture (5.25 ± 0.22 µkat/gprotein) was yielded after 90 h of cultivation. The DAO-GH was partially purified by the polyethyleneimine precipitation of nucleic acids, fractionated ammonium sulfate precipitation and hydrophobic interaction chromatography, resulting in a specific DAO activity of 19.7 µkat/gProtein. The DAO-GH was then biochemically investigated regarding its potential for histamine and tyramine degradation in fermented foods and the human small intestine. Interestingly, the DAO-GH showed activity even at a low pH of 5 and low temperature of 6 °C. Both histamine and tyramine were effectively degraded and DAO-GH showed especially very high affinity towards tyramine (Km of 0.009 mM). The DAO-GH was shown to be capable of degrading around 20% of the initially applied histamine in tuna paste (pH 5.6) at 5 °C within 24 h and completely degraded the histamine in a simulated intestinal fluid within 1.5 h in bioconversion experiments. The DAO-GH was spray-dried for the production of a storable enzyme preparation. Only around 17% of activity were lost in this process and the DAO-GH remained stable at room temperature for at least 3 months. The discovery of this DAO with its very advantageous biochemical properties allows the preparation of histamine-reduced or -free fermented foods by a simple enzymatic treatment or the treatment of histamine intolerance symptoms as a dietary supplement or medicine.
Effect of smoldering air volume flow rates and smoking time on quality attributes of Frankfurter-type sausages
(2025) Leible, Malte; Herrmann, Kurt; Gibis, Monika; Weiss, Jochen; Leible, Malte; Department of Food Material Science, Institute of Food Science and Biotechnology, University of Hohenheim, Garbenstrasse 21/25, 70599, Stuttgart, Germany; Herrmann, Kurt; Department of Food Material Science, Institute of Food Science and Biotechnology, University of Hohenheim, Garbenstrasse 21/25, 70599, Stuttgart, Germany; Gibis, Monika; Department of Food Material Science, Institute of Food Science and Biotechnology, University of Hohenheim, Garbenstrasse 21/25, 70599, Stuttgart, Germany; Weiss, Jochen; Department of Food Material Science, Institute of Food Science and Biotechnology, University of Hohenheim, Garbenstrasse 21/25, 70599, Stuttgart, Germany
This study explores the effects of varying smoking conditions on the properties of Frankfurter-type sausages. Using a modified smoldering smoke generator, air volume flow rate and smoking time were varied to assess their impact on color, texture, and sensory characteristics. The results showed significant changes in these characteristics and a wide spectrum in smoke color was produced across the 14 different settings. L* values ranged from 64.32 ± 0.61 to 46.33 ± 0.78, a* values ranged from 11.81 ± 0.29 to 24.18 ± 0.39, b* values ranged from 14.93 ± 0.77 to 41.20 ± 1.25 with an increase in smoking time and air volume flow generally leading to a darker smoking color. Sensory test regarding color showed that the perceived color behaved similarly to the measured color. In these descriptive tests the perceived color ranged from 0.42 ± 0.42 to 9.67 ± 0.43 on a scale from 0 to 10. Smoke odor did not show the strong differences seen in the other results. Here the perceived smoke odor ranged from 4.76 ± 2.00 to 8.64 ± 1.03 on a scale from 0 to 10. Since the study was based on a statistical experimental plan, a predictive model based on a surface plot could be established. These findings provide valuable insights in the qualitative changes in Frankfurter -Type sausages for optimizing smoking parameters in the food industry, potentially enabling precise control over desired sensory and physical properties in smoked meat products.
Effect of varying salt concentration on iridescence in precooked pork meat
(2022) Ruedt, Chiara; Gibis, Monika; Weiss, Jochen
The objective of this study was to investigate the effect of salt concentration on meat iridescence in cured cooked pork products. In addition, the influence of nitrite and pigmentary color on iridescence and its visual macroscopic perception was ascertained. Sample cubes from the pigs M. longissimus thoracis et lumborum were salted with either NaCl (20 g/kg, 40 g/kg) or nitrite curing salt (6 g/kg, 20 g/kg, and 40 g/kg) and subsequently cooked. Control samples were not salted. The effects of NaCl and curing salt on iridescence, instrumental color and microstructure were evaluated. Salt treatment significantly (p < 0.05) increased water-holding capacity, mean myofibers diameters and iridescence and reduced light scattering (L* value). An iridescence limit was reached with the 20 g/kg salt treatments. No differences between sodium chloride and nitrite curing salt were observed for both visual evaluation and colorimetry of the interference colors. Iridescence increases were attributed to a swelling of the myofilament lattice and thus reduction of intermyofibrillar spaces as well as an optical clearing of the myofibrils by dissolution of myofibrillar proteins that both reduce light scattering and allow more reflectance and interference to occur.
Food fermentation: an essential unit operation towards secure, sustainable, safe, and sustaining food systems
(2025) Gänzle, Michael G.; Seifert, Jana; Weiss, Jochen; Zijlstra, Ruurd T.
Genome-wide association reveals host-specific genomic traits in Escherichia coli
(2023) Tiwari, Sumeet K.; van der Putten, Boas C. L.; Fuchs, Thilo M.; Vinh, Trung N.; Bootsma, Martin; Oldenkamp, Rik; La Ragione, Roberto; Matamoros, Sebastien; Hoa, Ngo T.; Berens, Christian; Leng, Joy; Álvarez, Julio; Ferrandis-Vila, Marta; Ritchie, Jenny M.; Fruth, Angelika; Schwarz, Stefan; Domínguez, Lucas; Ugarte-Ruiz, María; Bethe, Astrid; Huber, Charlotte; Johanns, Vanessa; Stamm, Ivonne; Wieler, Lothar H.; Ewers, Christa; Fivian-Hughes, Amanda; Schmidt, Herbert; Menge, Christian; Semmler, Torsten; Schultsz, Constance
Background: Escherichia coli is an opportunistic pathogen which colonizes various host species. However, to what extent genetic lineages of E. coli are adapted or restricted to specific hosts and the genomic determinants of such adaptation or restriction is poorly understood. Results: We randomly sampled E. coli isolates from four countries (Germany, UK, Spain, and Vietnam), obtained from five host species (human, pig, cattle, chicken, and wild boar) over 16 years, from both healthy and diseased hosts, to construct a collection of 1198 whole-genome sequenced E. coli isolates. We identified associations between specific E. coli lineages and the host from which they were isolated. A genome-wide association study (GWAS) identified several E. coli genes that were associated with human, cattle, or chicken hosts, whereas no genes associated with the pig host could be found. In silico characterization of nine contiguous genes (collectively designated as nan-9 ) associated with the human host indicated that these genes are involved in the metabolism of sialic acids (Sia). In contrast, the previously described sialic acid regulon known as sialoregulon (i.e. nanRATEK-yhcH , nanXY , and nanCMS ) was not associated with any host species. In vitro growth experiments with a Δ nan-9 E. coli mutant strain, using the sialic acids 5- N -acetylneuraminic acid (Neu5Ac) and N -glycolylneuraminic acid (Neu5Gc) as sole carbon source, showed impaired growth behaviour compared to the wild-type. Conclusions: This study provides an extensive analysis of genetic determinants which may contribute to host specificity in E. coli . Our findings should inform risk analysis and epidemiological monitoring of (antimicrobial resistant) E. coli .
Glucoselipid biosurfactant biosynthesis operon of Rouxiella badensis DSM 100043T: screening, identification, and heterologous expression in Escherichia coli
(2025) Harahap, Andre Fahriz Perdana; Treinen, Chantal; Van Zyl, Leonardo Joaquim; Williams, Wesley Trevor; Conrad, Jürgen; Pfannstiel, Jens; Klaiber, Iris; Grether, Jakob; Hiller, Eric; Vahidinasab, Maliheh; Perino, Elvio Henrique Benatto; Lilge, Lars; Burger, Anita; Trindade, Marla; Hausmann, Rudolf; Seo, Myung-Ji
Rouxiella badensis DSM 100043T had been previously proven to produce a novel glucoselipid biosurfactant which has a very low critical micelle concentration (CMC) as well as very good stability against a wide range of pH, temperature, and salinity. In this study, we performed a function-based library screening from a R. badensis DSM 100043T genome library to identify responsible genes for biosynthesis of this glucoselipid. The identified open reading frames (ORFs) were cloned into several constructs in Escherichia coli for gene permutation analysis and the individual products were analyzed using high-performance thin-layer chromatography (HPTLC). Products of interest from positive expression strains were purified and analyzed by liquid chromatography/electrospray ionization tandem mass spectrometry (LC-ESI-MS/MS) and nuclear magnetic resonance (NMR) for further structure elucidation. Function-based screening of 5400 clones led to the identification of an operon containing three ORFs encoding acetyltransferase GlcA (ORF1), acyltransferase GlcB (ORF2), and phosphatase/HAD GlcC (ORF3). E. coli pCAT2, with all three ORFs, resulted in the production of identical R. badensis DSM 100043T glucosedilipid with Glu-C10:0-C12:1 as the main congener. ORF2-deletion strain E. coli pAFP1 primarily produced glucosemonolipids, with Glu-C10:0,3OH and Glu-C12:0 as the major congeners, predominantly esterified at the C-2 position of the glucose moiety. Furthermore, fed-batch bioreactor cultivation of E. coli pCAT2 using glucose as the carbon source yielded a maximum glucosedilipid titer of 2.34 g/L after 25 h of fermentation, which is 55-fold higher than that produced by batch cultivation of R. badensis DSM 100043T in the previous study.
High-performance thin-layer chromatography for the detection of compositional changes in LACTEM emulsifiers during storage
(2025) Schuster, Katharina; Blankart, Max; Hinrichs, Jörg; Oellig, Claudia
Quality control of food emulsifiers, such as lactic acid esters of mono- and diacylglycerols (LACTEM), is crucial in the reproducible production of food products. The current study investigated compositional changes of LACTEM emulsifiers using high-performance thin-layer chromatography (HPTLC) during storage at 60 °C for 8 weeks. Ultraviolet (UV) and fluorescence images of the HPTLC silica gel F254s plates after primuline derivatization and densitometric data were analyzed to assess changes in the composition. Significant changes were observed for minor LACTEM components (< 10% relative intensity), specifically a decrease in higher-lactylated monoacylglycerols and an increase in triacylglycerols. Techno-functional properties, such as particle size distribution, apparent viscosity, overrun, foam firmness, drainage, and residual cream of aerosol whipping cream (0.8 g 100 g−1 LACTEM) were investigated. While emulsion stability was not affected, the foam firmness increased significantly, corresponding to a visibly more brittle foam. On the basis of these results, monitoring compositional changes in the food-manufacturing process is necessary to maintain constant food quality.
An innovative approach in the baking of bread with CO2 gas hydrates as leavening agents
(2022) Srivastava, Shubhangi; Kollemparembil, Ann Mary; Zettel, Viktoria; Claßen, Timo; Mobarak, Mohammad; Gatternig, Bernhard; Delgado, Antonio; Jekle, Mario; Hitzmann, Bernd
Gas (guest) molecules are trapped in hydrogen-bonded water molecules to form gas hydrates (GH), non-stoichiometric solids that resemble ice. High pressure and low temperature are typical conditions for their development, with van der Waals forces joining the host and guest molecules. This article study investigates the application of CO2 gas hydrates (CO2 GH) as a leavening agent in baking, with particular reference to the production of wheat bread. The main intention of this study is to better understand the complex bread dough formed by CO2 GH and its impact on product quality. This may enable the adaptation of CO2 GH in baking applications, such as those that can specifically influence wheat bread properties, and so the final bread quality. The present research further examines the comparative evaluation of yeast bread with the GH bread’s impact on bread quality parameters. The amount of GH was varied from 10 to 60%/amount of flour for the GH breads. The GH breads were compared with the standard yeast bread for different quality parameters such as volume, texture, and pore analysis. The results show that the bread with 20% and 40% GH obtained the best results in terms of volume and pore size. Moreover, this article also sheds some light on the future applications of the use of CO2 GH as leavening agents in foods. This knowledge could help to create new procedures and criteria for improved GH selection for applications in bread making and other bakery or food products.
Oral processing of anisotropic food structures: A modelling approach to dynamic mastication data
(2024) Oppen, Dominic; Weiss, Jochen
Materials that have been generated through a directionally oriented growth process often exhibit anisotropic properties. Plant materials such as tubers and roots or animal matter used to produce products such as steaks or pasta filata are characterized by an alignment of molecules, aggregates or cells in certain dimensions leading to differing properties depending on direction. Such an anisotropic property behavior is important for a wide range of quality attributes such as texture, appearance, stability and even aroma and taste. Especially the former is of critical importance to consumer liking and acceptance of foods. Structure-texture relationships have already been established for certain foods. For anisotropic foods though, a determination of such relationships is difficult, since the comminution of foods during chewing causes complex changes to the underlying anisotropic structure elements that are not easily measurable using conventional mechanical texture analysis tests such as cutting, shearing or compression. On the other hand, sensory tests using panels are very time consuming and often do not reveal structural causes for texture like or dislike by consumers. The lack of availability of suitable analytical techniques that allow for a description of texture properties relevant to mastication hampers especially the development of meat substitutes that are currently trending. The aim of this work was therefore to characterize changes to anisotropic structures induced by chewing (henceforth referred to as "oral processing") using a novel measurement approach that records kinematic and electromyographic properties of the chewing process. The kinematics of jaw movement were recorded using a 3D motion tracking system. Muscle activity was recorded using an electromyograph. From the measured data, characteristics for individual chews were calculated, which were represented in a linear mixed model as a function of the food structure. Section I provides the scientific basis for this work through a preface and a literature review. Grown and manufactured anisotropic foods are identified and described. A general overview of the production, phase phenomena and characterization methods for anisotropic food materials is given. Section II contains the oral processing experiments. In Chapter III, the focus was put on the impact of fiber length of grown structures on mastication behavior. Meat model systems with different microstructures but the same composition were produced. The model systems with anisotropic and isotropic microstructures were comminuted to different sizes, and the fiber length was inferred from the length of the particles, taking into account the particle size effect of chewing. The results indicate that longer fibers cause greater jaw movement and muscle activity. For instance, estimate peak muscle activity of anisotropic samples is 58.2857 µV higher (p=0.0156) compared to isotropic samples. Chapter IV describes minced meat products in which certain phase volumes were replaced by a finely comminuted meat mass. The aim of the study was to find detection limits beyond which an increase or decrease in muscle fiber cells does not lead to a further adjustment of the mastication properties. In the study, a transition point was identified at around 50 % of batter-like substances. Food models with more than 50 % of batter-like substance showed a smaller change in mastication parameters. The effect was more pronounced with higher proportions of fibrous material. Chapter V dealt with the topic of meat substitutes. A simple model of meat substitutes was used to test whether the effects found in anisotropic animal-based products can also be found in plant-based products. Hydrocolloid gels with different phase volumes of wet textured plant protein were produced. Similar effects for the animal-based products were observed, although the correlation was not as strong. It was hypothesized that a large part of the effect was due to the weak binding ability of hydrocolloid gels. Thus, the anisotropic particles could not be held together with a low proportion of the outer hydrocolloid gel and required less muscle activity despite a higher content of structured phase. Section III assessed alternative data evaluation strategies to the linear mixed model. The aim of the study in Chapter VI was to anticipate the model products from Chapter III using a classification approach. Algorithms of three categories were trained with the data set of the chewing processes. Two approaches were used to evaluate whether the algorithms could either resolve each individual food model with variations in microstructure (anisotropy) and macrostructure (particle size) or in microstructure only. For both approaches, the algorithms performed significantly better compared to a random guessing. The best classification results were achieved by the boosted ensemble learner "XGBoost", which assigned 96.617 % of all bites to the corresponding food microstructure. Furthermore, it was demonstrated that standardized and normalized oral processing data are almost not subject-dependent. In addition, feature importance analysis confirmed that lateral jaw movement is a good indicator of the presence of anisotropic food material and, with a weight of 0.39205, is the most important feature for classifying samples according to their structure. In summary, this work was able to show that the dynamic characteristics of mastication change depending on anisotropic properties. In general, modeling of mastication characteristics has never been conducted before and represents a promising advance over mean-based evaluation. The machine learning approach is also new in the field of oral processing and proved to be promising. For future research, it is proposed to correlate the dynamic features with sensory texture data to obtain direct correlations between chewing characteristics and texture attributes.
A research note: effect of pH on meat iridescence in precooked cured pork
(2022) Ruedt, Chiara; Gibis, Monika; Weiss, Jochen
Objective: The objective of this study was to investigate the effect of pH change of cooked cured pork M. longissimus thoracis et lumborum on iridescence intensity and extent (= percentage of iridescent area) since interaction with light may be related to pH-induced alterations in microstructure. Muscles were injected with brines of different pH values, cooked, sliced perpendicular to muscle fiber direction, and visually evaluated by a panel of 20 experienced panelists. Results: Muscles with lowest pH (5.38) showed the lowest iridescence score of 4.63 (p < 0.05). Iridescence was greatest in muscles with normal (5.78) and high pH (6.03, respectively 6.59), but did not differ significantly (p > 0.05). Iridescence was positively correlated (p < 0.01) with pH and water content, and negatively correlated (p < 0.01) with cooking loss. Hence, hydration state and light scattering from microstructure may be important factors that determine the degree of iridescence in cooked meat products.
Spatial transcriptomics of a parasitic flatworm provides a molecular map of drug targets and drug resistance genes
(2024) Gramberg, Svenja; Puckelwaldt, Oliver; Schmitt, Tobias; Lu, Zhigang; Haeberlein, Simone; Gramberg, Svenja; Institute of Parasitology, Justus Liebig University Giessen, Giessen, Germany; Puckelwaldt, Oliver; Institute of Parasitology, Justus Liebig University Giessen, Giessen, Germany; Schmitt, Tobias; Institute of Parasitology, Justus Liebig University Giessen, Giessen, Germany; Lu, Zhigang; Institute of Food Science and Biotechnology, University of Hohenheim, Stuttgart, Germany; Haeberlein, Simone; Institute of Parasitology, Justus Liebig University Giessen, Giessen, Germany
The spatial organization of gene expression dictates tissue functions in multicellular parasites. Here, we present the spatial transcriptome of a parasitic flatworm, the common liver fluke Fasciola hepatica . We identify gene expression profiles and marker genes for eight distinct tissues and validate the latter by in situ hybridization. To demonstrate the power of our spatial atlas, we focus on genes with substantial medical importance, including vaccine candidates (Ly6 proteins) and drug resistance genes (glutathione S-transferases, ABC transporters). Several of these genes exhibit unique expression patterns, indicating tissue-specific biological functions. Notably, the prioritization of tegumental protein kinases identifies a PKCβ, for which small-molecule targeting causes parasite death. Our comprehensive gene expression map provides unprecedented molecular insights into the organ systems of this complex parasitic organism, serving as a valuable tool for both basic and applied research.
Towards sustainable biointelligent food design: structuring potential of plant-based materials exemplified using apricot seed oil oleogels and bigels through 3D food printing
(2025) Reinmuth, Evelyn; Fahmy, Ahmed Raouf; Ribette, Olivia; Jekle, Mario; Reinmuth, Evelyn; Bioeconomy Office Hohenheim, University of Hohenheim, Stuttgart, Germany; Fahmy, Ahmed Raouf; Department of Plant-Based Foods, Institute of Food Science and Biotechnology, University of Hohenheim, Stuttgart, Germany; Ribette, Olivia; Department of Plant-Based Foods, Institute of Food Science and Biotechnology, University of Hohenheim, Stuttgart, Germany; Jekle, Mario; Department of Plant-Based Foods, Institute of Food Science and Biotechnology, University of Hohenheim, Stuttgart, Germany
Background/Introduction: Biointelligence in the approach of food additive manufacturing represents a significant advancement, enabling the reverse engineering and design of foods. Legislation restricting trans-fats has accelerated research into alternatives, but ingredients like saturated and trans fats play key roles in food quality and functionality. Oleogels are a promising replacement. Food additive manufacturing introduces a biointelligent approach, combining biological and technical components with information technology to optimize food design. This study investigates 3D printing of oleogel and bigel systems using apricot seed oil, aiming to assess their significance, applicability, and printability as sustainable alternatives to trans fats for innovative, resource-efficient food production. Methods: Apricot seed oil, rich in antioxidants and polyunsaturated fatty acids, was processed into plant-based oleogels and bigels. The material systems were incorporated into 3D printed food structures. Material characterization and techno-functional analysis were conducted to evaluate the suitability of apricot seed oil for structuring 3D printed foods and controlling food texture. Results: Adjusting the type and concentration of oil-gelator mixtures enabled tailored texture and lipid distribution to fit consumer preferences. Sustainability impacts were assessed at intermediate processing steps, demonstrating the value of holistic evaluations beyond technical factors. Discussion: Biointelligent 3D printing offers a platform to optimize sensory and sustainability qualities in food design. The integration of apricot seed oil into novel food matrices enables versatile nutritional product development, supporting researchers and industry stakeholders in advancing consumer-centric, sustainable production and consumption practices.
Using ground oyster mushroom and chia seeds for the fortification of wheat bread-Nelder–Mead simplex optimisation
(2025) Schneider, Yannik; Zettel, Viktoria
Wheat bread was enriched with ground chia and ground oyster mushroom to improve its nutritional properties regarding protein and fibre content within the context of food fortification while maintaining a high specific volume and a soft crumb. A bread made from 100% wheat flour was used as reference. The Nelder–Mead simplex algorithm was used to determine the optimal proportions of chia and oyster mushroom substitution in the recipe. Bread quality was analysed and rated. Chia has a positive effect on the baking result due to its water-binding capacity, while mushrooms have a rather negative effect caused by the enzymes they contain. It was possible to replace 1.6% of wheat flour with ground oyster mushroom and 1.2% chia without any deviations from the control within 7 steps Furthermore, the partially substituted breads showed 3.8% lower contents of carbohydrates with a reduction of 4.1% of total sugar and higher contents of dietary fibre and protein, 22.7% and 2.3% respectively in comparison with the control sample. The wheat flour in bread can be replaced by chia flour and ground oyster mushrooms in small quantities without compromising the quality of the bread while improving some nutritional values.
Visual tracking of a moving target in 360-degree virtual reality: analysis of the effects on attention and mood
(2025) Sellner, T.; Ehmann, P.; Spielmann, J.; Gogolla, F.; Rösgen, A.; Mayer, J.; Schoenfeld, M. A.; Flor, H.
The training of attentional capacities is an important part of many rehabilitative efforts, for example, in the treatment of stroke. The Helix-Arena is an innovative virtual reality (VR) training device, which enables multimodal training in a 360-degree virtual environment. A pursuit training was developed for the Helix-Arena. In this study, we evaluate the effectiveness of the pursuit training in the Helix-Arena compared to a control group [CG, training on a personal computer (PC)] in 34 healthy participants. The experimental group (EG, N = 19) participated in four training sessions in the Helix-Arena over a period of 2 weeks. The control group (N = 15) completed similar training sessions in a non-VR environment on a PC. During each training session, changes in attention (Test of Attentional Performance battery, TAP) and general mood (Positive and Negative Affect Schedule, PANAS) were assessed pre- and post-training. A significantly higher pre-to-post improvement was observed in the EG for the TAP subtest attention shift in the subcategory invalid instructor ( p = 0.04) than that in the CG. In addition, we found a higher positive affect after the training in the EG but not in the CG (p < 0.01). These results suggest advantages of the VR environment for attentional and affective processes. The VR training can thus improve not only cognitive abilities but also training motivation. In a next step, the training can be used with patients in a rehabilitation context, but it is also suitable for educational and gaming contexts.

Browse

Browsing Institut für Lebensmittelwissenschaft und Biotechnologie by Sustainable Development Goals "3"