Browsing by Subject "HPTLC"

Now showing 1 - 4 of 4

Development of a planar yeast estrogen screen as screening tool for estrogen active compounds
(2018) Schick, Dinah; Schwack, Wolfgang
Substances that disrupt or impair the hormone system (endocrine system) or that show an irreversible influence on it are referred to as endocrine disruptors or xenohormones. Concerning this, also estrogen active compounds (EAC) are endocrine disruptors, that are under suspicion of being involved in the formation of tumors or to induce disruption during development and reproduction, and are, for example, blamed for being responsible for the feminization of fish. At this, EAC can be natural (human, phytoestrogens) but also synthetic substances, which are discharged to the environment by humans (e.g. pharmaceuticals, pesticides, additives). Regarding the ubiquitous presence of EAC, suitable methods for the analysis of EAC are required. An in vitro method for the determination of EAC is the YES assay (yeast estrogen screen) that is executed in liquid solutions in microtiter plates and that works with genetically modified yeasts, which contain the human estrogen receptor (hER) and a reporter gene encoding for the enzyme beta-galactosidase. In presence of EAC, the enzyme is produced and subsequently cleaves a substrate that is used to measure the receptor activity and thus the estrogenic activity. The transfer of the YES assay to high-performance thin-layer chromatography (HPTLC) was successfully demonstrated and advanced, thus resulting in the combination of a chromatographic separation of analytes and the detection of EAC using genetically modified yeast cells directly on the HPTLC plate (HPTLC planar yeast estrogen screen, HPTLC-pYES). Usually, the substrate 4-methylumbelliferyl-beta-D-galactopyranoside is used for pYES, releasing blue fluorescing 4-methylumbelliferone (MU) after enzymatic cleavage. Various matrices, however, often contain a plenty of different components, partly showing native fluorescences (blue, red), why the detection of the blue fluorescing MU can be interfered. By applying the substrate resorufin-beta-D-galactopyranoside (RGP) and by using automated devices, the RGP-pYES as fast screening tool for EAC was developed and successfully applied to waste water samples and extracts of hops pellet samples. A screening method using HPTLC simultaneously represents a planar clean-up, why samples do not have to undergo complex steps of sample preparation or purification. The chromatographic separation in combination with the detection of estrogenic activity using genetically modified yeasts directly on the plate allowed the detection, the determination and the identification of single EAC. Using RGP, which releases orange fluorescing resorufin after enzymatic cleavage as positive signal of estrogenic activity, enabled a clear differentiation between fluorescences due to estrogenicity and the native fluorescence of sample components. Application of the RGP-pYES to spiked water samples and sewage samples showed high recovery rates and a good precision, and thus the applicability of the method as screening tool for environmental samples. By means of suitable evaluation methods, additionally the generation of dose-response curves of known and unknown EAC and thus the generation of so-called logit-log plots was possible. This enabled the determination of estradiol equivalent factors of known EAC as well as the determination of estradiol equivalent concentrations and amounts, respectively, of known and unknown EAC in liquid and solid samples. Thus, the possibility to estimate the estrogenic potential of a sample or single sample components was given. The coupling of pYES to mass spectrometry additionally allowed the identification of unknown EAC, demonstrated exemplarily by investigation of extracts of hops pellet samples, in which the only detected EAC in the hops extracts was identified as prenylnaringenin. Since the method uses a planar system, the pYES advantageously reveals all chromatographically separated sample components at one look and, as bioassay, additionally detects a possible estrogenic activity (activity at the hER) of single substances, while a differentiation between native occurring fluorescences of sample contaminants and the fluorescence as positive signal for estrogenicity of a substance is granted.
Development of strategies for the prioritization of organic trace substances in water by effect-directed analysis
(2020) Stütz, Lena; Schwack, Wolfgang
The protection of the aquatic environment and the supply of clean drinking water to people all over the world are central challenges of our time. Monitoring of the aquatic environment and the input of anthropogenic trace substances into it is therefore very important. However, since aquatic environmental samples often consist of complex substance mixtures, their characterization and evaluation is very demanding. By using generic target analysis methods, selected known anthropogenic trace substances can be detected and quantified very sensitively. For the detection of previously unknown substances, non-target analysis methods have been increasingly used in recent years. However, these methods do not provide information on the relevance of the anthropogenic trace substances occurring in water. In this context, especially all those trace substances are regarded as relevant from which a harmful effect on humans or water organisms is to be expected. For the detection of such effective substances, effect-directed analysis (EDA) can be used. In EDA, a bioassay is combined with a fractionation method and subsequent chemical analysis, the aim being to identify the bioactive substance. The separation method used in this work is high-performance thin-layer chromatography (HPTLC). After chromatography, the bioassay is performed directly on the HPTLC plate. If an effective zone appears in the bioassay, a prioritization strategy is used to clarify the identity of the substance. Due to the complex aquatic samples, a large number of different substances in a zone must still be expected despite the applied HPTLC separation, which makes it difficult to identify the effective substance. Therefore, a strategy to simplify the identification of effective substances should be developed. The aim was to reduce the complexity by multidimensional separation in such a way that chemical analysis can be used to prioritize to a few candidates in the effective fraction. In the first part of the work, a selective two-dimensional HPTLC separation was developed to reduce the number of substances in a bioactive zone. After the first separation dimension (1D) the acetylcholinesterase inhibition assay (AChE assay) was performed and afterwards only the effective zones were extracted from the HPTLC plate. The selected effective zones were separated in a second separation dimension (2D) and the bioassay was performed again. With this 2D separation, the peak capacity could be increased by a factor of 7 compared to a 1D HPTLC gradient development. If real water samples are examined for their effects, an additional structural elucidation must be carried out to clearly identify the unknown bioactive substances. In this work, the developed 2D EDA was therefore connected to a high-performance liquid chromatography (HPLC) with high-resolution mass spectrometry (HRMS) and a non-target screening (NTS) was performed. Using three water samples(drinking water, surface water and purified sewage water) spiked with six effective substances, it was shown that the developed strategy is suitable for the identification of effective substances and that these can be recovered despite repeated extraction. When applying the developed methodology to real samples, it was also possible to assign and quantify the detected effect in several waters to the substance lumichrome and to linear alkylbenzene sulfonates. Genotoxicity is a crucial endpoint for the effect assessment of water samples. However, this endpoint with metabolic activation cannot yet be performed directly on the HPTLC plate. Since many of the genotoxic substances have an indirect genotoxic effect, i.e. they only acquire their activity after metabolic activation; this endpoint was investigated in the present work with the umu assay in the microtiter plate. However, separation with HPTLC, subsequent extraction of effective zones and non-target analysis of the extracts, should also be performed for this assay. Therefore the umu assay in the microtiter plate was integrated into the existing EDA-with-HPTLC concept. In laboratory experiments, sodium hypochlorite was added to the drug metformin in order to simulate the behavior of the substance during water treatment (chlorination). The metformin sample treated with hypochlorite was examined with the umu assay and a genotoxic effect was detected. After HPTLC separation of the chlorinated sample, zones were extracted over the entire retardation range. When the extracted zones were examined with the umu assay, the genotoxic effect could be clearly assigned to one fraction. Using high-resolution mass spectrometry, the genotoxic effect could be assigned to an already known transformation product of metformin. The HPTLC separation and extraction of the zones from the plate led to a reduction of the possible effective candidate masses by a factor of 10 and thus to a clear prioritization in HRMS analysis.
High-throughput planar solid phase extraction : a new clean-up concept in multi-residue analysis of pesticides
(2014) Oellig, Claudia; Schwack, Wolfgang
Currently, the most serious problems in pesticide residue analysis by liquid chromatography (LC) or gas chromatography (GC) coupled to mass spectrometry (MS) concern the so-called “matrix effects”. The most common way to avoid these effects is the application of matrix-matched calibration standards. Nevertheless, an efficient clean-up undoubtedly is the best way to prevent matrix effects in multi-residue analysis of pesticides in food by LC–MS or GC–MS. For a totally new powerful clean-up method, called high-throughput planar solid phase extraction (HTpSPE), highly automated planar chromatographic tools were applied to remove co-extracted matrix substances entirely and to eliminate any kind of matrix related effects. For sample extraction, the quick, easy, cheap, effective, rugged, and safe (QuEChERS) method was used to initially collect pesticides from fruits and vegetables. The received acetonitrile extracts were applied directly for the development of the novel HTpSPE clean-up. Thin-layer chromatography (TLC) was used to completely separate pesticides from matrix compounds and to focus them into a sharp zone. A two-fold development on amino-modified silica gel thin-layers with acetonitrile for the first development, and acetone for the second development in the backwards direction, was evaluated to perform the best clean-up result and collect the pesticides in a sharp, single target zone. To easily locate the pesticide zone, the Sudan II dye was added to the extracts. Following this clean-up, the target zones (pesticides) were eluted by the TLC–MS interface into vials for the LC–MS determination. HTpSPE resulted in extracts which were nearly free of co-extracted matrix and matrix effects, as shown for seven chemically representative pesticides (acetamiprid, azoxystrobin, chlorpyrifos, fenarimol, mepanipyrim, penconazole, and pirimicarb) in four different fruit and vegetable matrices (apples, cucumbers, red grapes, and tomatoes). Thanks to the very clean HTpSPE extracts, calibration can simply be performed with pure solvent standards and the quantitation by LC–MS provided excellent mean recoveries and relative standard deviations. In addition, tea samples as rather challenging matrices were chosen to apply for HTpSPE. The matrix load of tea extracts generally was too high for the available thin-layer capacity and the selectivity of the amino-modified phase was not suitable for the separation of caffeine and further matrix compounds from the target analytes (pesticides). By modifying the sample extraction, adding a pre-cleaning by dispersive solid phase extraction (dSPE) and changing the thin-layer phase to normal phase silica gel, the complete separation of pesticides and tea matrix components was possible, when again a two-fold development was applied. Caffeine and other alkaloids were completely removed. The effectiveness of HTpSPE was demonstrated by LC–MS/MS calibration curves from matrix-matched and solvent standards, which were nearly identical and by very good mean recoveries, calculated against pure solvent standards. Concerning all validation parameters, the new acetonitrile-HTpSPE procedure for tea samples was superior to the QuEChERS-dSPE method and offered highly successful results. In recent years, large-scale screening in pesticide residue analysis has gained more and more importance. Keeping this in mind, a screening strategy for HTpSPE extracts, using a high-resolution MS, was developed to analyze the cleaned extracts directly for pesticide residues without a liquid chromatographic separation. By this hyphenation, a completely new microliter-flow injection analysis–time-of-flight mass spectrometry (µL-FIA–TOFMS) screening was introduced. The novel HTpSPE–µL-FIA–TOFMS approach enabled the detection of all pesticides simultaneously in a single mass spectrum within a few minutes. The obtained mass spectra were nearly free of matrix compounds, which is especially the great benefit of the effective HTpSPE clean-up. Recovery studies by HTpSPE–µL-FIA–TOFMS against solvent standards for the matrices and pesticides under study provided excellent results, using the mass signal intensities under the entire FIA sample peak. HTpSPE clearly showed superior results concerning every tested parameter than dSPE. With the help of a self-constructed mass database searching tool, all spiked pesticides were detected and correctly identified, while only very low numbers of false-positive findings occurred. Furthermore, a non-target screening approach was successfully implemented by slightly changing the database searching process, offering a mass list of all substances, which are present in the injected extracts but not included in the mass database. Finally, the new HTpSPE–µL-FIA–TOFMS screening was successfully applied to several real samples, when the identified pesticides were quite identical compared to results of LC–MS/MS analysis of the QuEChERS-dSPE extracts.
HPTLC-bioluminescence detection: methodological improvements and the application of the method to mouthwashes
(2013) Baumgartner, Vera; Schwack, Wolfgang
For the chemical analysis of food, drugs, and environmental samples it becomes more and more important to find substances of a certain (biological) activity. For this, several biological screening assays are available. One of the most versatile is the luminescent bacteria test according to an international norm (DIN EN ISO 11348), a rapid cuvette test on cytotoxicity. The assay employs the naturally bioluminescent bacterium Vibrio fischeri, which emits blue-green light under good living conditions. Because the energy-consuming luminescence metabolism is linked directly to the bacterium?s respiratory chain, a disturbance of the bacterium?s metabolism affects the luminescence, whereas the degree of toxicity is proportional to the luminescence inhibition. Major advantage was achieved by coupling this biotest with previous separation by high-performance thin-layer chromatography (HPTLC), which allowed for a screening for individual components. The workflow consists of sample application onto an HPTLC plate, separation, drying the plate, application of the Vibrio fischeri suspension, and detection with a light-sensitive CCD camera. In the resulting image, dark zones on a brightly luminizing background indicate substances that affect the bacteria?s metabolism. No suitable image evaluation program for the effective correction and quantitative evaluation of the image after Vibrio fischeri detection was available, which was regarded as a great disadvantage. In literature, adaptations of the special corrections based on the cuvette test calculations were described, including horizontal background correction and the recalculation of the sigmoid dose-response-relationship of the bacteria?s reaction. This served as a basis for the development of a new method using existing software which did not only perform the necessary calculations but was easy and convenient enough for use in routine evaluations. Furthermore, the process of applying the aqueous bacteria suspension onto the HPTLC plates was improved. Usually, application was done by dipping with the help of a dipping device. Especially for polar substances, however, it was observed that substances can start to dissolve during this process, leading to blurring and tailing of the zones on the plate. A simple rolling device consisting of commercially available household articles was constructed. To compare rolling with dipping, octhilinone and methylparaben were chosen as test compounds. The results of rolling were far superior to dipping. However, manual rolling depended on the person who did it, and it was not possible to control pressure and velocity. To overcome this problem, a prototype of an automated rolling device was constructed and built. After the successful process optimizations, the applicability of the HPTLC-bioluminescence assay was tested on commercial mouthwashes. Mouthwashes are likely to contain antimicrobial compounds, which are not necessarily indicated on the packaging. HPTLC with biodetection was used as a rapid screening method to detect zones of interest, which were further analyzed by conventional techniques like HPLC and GC. First, the reaction of Vibrio fischeri towards more than 40 standard substances was determined. This database was used for the analysis of six commercially available mouthwashes. It revealed that not only declared preservatives are used in mouthwashes, but also other antimicrobial compounds. These were especially constituents of essential oils having antibacterial properties (anethole, carvone, menthol, thymol), but are summarized as ?aroma?, which is in compliance with legal restrictions. A most interesting question concerns the bacteria?s condition on the HPTLC plate. For the brightly luminizing background, it must be assumed that the bacteria are well alive. But no clear statement can be given for bacteria in the dark zones: they might be dead, inhibited (maybe only temporarily), or absent due to water repelling effects of the zone?s compound. A basic attempt to answer this question was made by applying a combination of classical microbiological techniques. In this dissertation it could be shown that HPTLC coupled with Vibrio fischeri detection can successfully be used in practice and is well suited to complement conventional analytical techniques. This work is meant to serve as a guideline for further research and new applications.